Kem Cho, friends! I am Dilipbhai, the proprietor of **Shivam Water Solution** on Vajepar Main Road, Morbi. For over 10 years, I have been serving households, offices, and ceramic factory units across Morbi and Rajkot, fixing everything from minor leaks to complete commercial RO plant installations.
One of the most frequent complaints customers bring to my shop is: *"Dilipbhai, our RO purifier is running, but the water is coming out in a tiny trickle! Why is the flow so slow?"*
If you are facing this exact problem in your home or office, don't worry. A drop in water pressure is a very common issue in Saurashtra, especially given our local groundwater conditions. In this comprehensive guide, I will share my hands-on expert knowledge to help you diagnose and resolve slow RO water flow.
---
## Why Water Flow Drops in Morbi & Rajkot Purifiers
To understand why your RO system is slow, you must first understand our local water quality. In regions like Morbi, Trajpar, Lalpar, and Rajkot, groundwater often carries high Total Dissolved Solids (TDS)—frequently ranging from 800 PPM to over 2500 PPM. Additionally, heavy ceramic industry activity and municipal water blending mean our water contains high levels of fine silt, calcium carbonate, and magnesium hardness.
When high-TDS, hard water passes through your domestic RO unit, filters get clogged much faster than in metro cities with soft surface water. Here are the 5 main reasons your RO purifier has low water pressure:
### 1. Clogged Pre-Filter and Sediment Cartridge
The pre-filter (the outer bowl attached on the wall) catches coarse sand, mud, and rust before it enters the RO machine. In Morbi, due to frequent pipeline disturbances and high silt, the spun PP pre-filter turns brown or black within 2 to 3 months. When this filter chokes, incoming water pressure drops drastically, choking the rest of the machine.
### 2. Scaled or Fouled RO Membrane
The RO membrane is the heart of your water purifier. Its microscopic pores (0.0001 microns) filter out dissolved salts and heavy metals. Due to high water hardness in Saurashtra, calcium scale rapidly builds up on the membrane surface. If your membrane is choked, pure water outflow slows to a drop-by-drop trickle while waste water continues flowing heavily.
### 3. Weak RO Booster Pump
Reverse osmosis requires high pressure (typically 60 to 80 PSI) to force water through the semi-permeable membrane. The internal 24V/36V DC booster pump provides this force. Over time, pump head valves wear out or the pump motor loses power due to voltage fluctuations (a common issue in industrial zones). A weak pump cannot generate enough pressure to force water through the membrane.
### 4. Low Pressure in Storage Tank (For Hydro-Pneumatic Systems)
If your RO system has a pressurized metal or plastic tank (common in under-sink models), it relies on an internal air bladder to push water up to the faucet. Over 1–2 years, this tank loses its air pressure. Even if the tank is full of water, it feels heavy but delivers almost no water pressure at the tap.
### 5. Kinked Pipes or Faulty Solenoid Valve (SV)
Sometimes the fix is purely mechanical. Check behind the machine—a bent or kinked food-grade PU tube restricts flow. Alternatively, a failing Solenoid Valve (SV) may not open completely, choking the water supply entering the pump.
---
## Quick DIY Steps You Can Check Today
Before calling a technician, try these simple checks at home:
1. **Inspect the Pre-Filter Housing:** Shut off the inlet valve, unscrew the outer filter bowl using the spanner, and inspect the white spun filter. If it is heavily coated in dark mud or slime, replace it immediately.
2. **Check the Raw Water Inlet Valve:** Ensure the main brass valve connected to your kitchen tap line is fully open.
3. **Inspect the Tubing:** Ensure there are no sharp bends or crushed pipes behind the RO unit.
4. **Check Waste Water Output:** Turn on the RO unit and observe the reject (waste) water pipe. If reject water is flowing strongly but pure water isn't coming, your membrane or post-carbon filter is likely blocked.
---
## Why Professional Maintenance Matters
While replacing a pre-filter is easy, diagnosing booster pump PSI, replacing inline carbon filters, or recalibrating the TDS controller requires specialized tools and genuine spare parts. Using cheap, non-branded membranes in high-TDS areas like Rajkot and Morbi will result in the membrane failing again within weeks.
At **Shivam Water Solution**, we stock 100% original, high-rejection RO membranes (such as Filmtec, Vontron, and CSM), heavy-duty copper-wound booster pumps, and food-grade inline filters designed specifically to withstand harsh Gujarati water conditions.
---
## Contact Dilipbhai at Shivam Water Solution
Don't compromise on your family's health with slow, improperly filtered water. If your RO system needs servicing, filter replacement, or a complete pressure checkup, I am just a phone call away!
* **Proprietor:** Dilipbhai
* **Business Name:** Shivam Water Solution
* **Address:** Vajepar Main Road, Near Old Bus Stand Area, Morbi - 363641, Gujarat
* **Phone / WhatsApp:** +91 91730 96727
* **Services Offered:** Domestic RO Repair, Commercial RO Plant Maintenance, Industrial Water Softeners, Genuine Spare Parts, and Annual Maintenance Contracts (AMC) across Morbi & Rajkot.
**Call +91 91730 96727 today for fast, honest, and affordable doorstep RO service!**